The drill is mainly for medium and small-sized parts drilling, reaming, reaming,tapping, scraping plane using mechanic workshop and machine repair shop,compared with the same type of machine tools at home and abroad, has small horsepower, high rigidity, high precision, good rigidity, convenient operation,easy to maintain.
The drill is a kind of small size, simple operation, the drill manufacturers usually installed small hole machining tool used in special working platform. Bench drillhole diameter is generally below 13 mm, usually not more than 25 mm.
Characteristics of bench drill multi function product
A, the bench is arranged on the upper part of a feeding device, a feeding devicecomprises a driving motor, a drill chuck is connected on the motor shaft and atorsion spring, a gear shaft and a rocking handle is composed of a travel mechanism, the feeding device is provided with a rear column through hole and aguide rod through hole are respectively sheathed on a column and a Yu Lizhuside guide rod rack gear shaft, a travel mechanism is arranged on the upper part of the upright post and is engaged;
B, bench drill manufacturers rack arranged on the upper beam of a motor switch box is provided with a travel switch;
C, the feeding device of drill chuck and the end is provided with a tool chuckflexible shaft connected to the upper body, a flexible transmission shaft bodyacross the table and hanging device is fixed on the work table;
A positioning bolt passes through the through hole bench top beam connectionD, bench drill factory feeding device above, the adjusting nut is arranged in the middle part of the lower side surface of the positioning bolt contact and bench top beam.
