The specification of FSDE5000
The work area width 4000mm, length can be customized according to customer needs
Processing diameter 14-50mm
Plate thickness of 100 mm
Spindle speed 100~600 rpm
Spindle motor 11KW
The spindle number greater than or equal to 1
Spindle travel 180mm
X high precision ball screw drive shaft
An Y shaft driving gear tooth row + + linear guide
Frequency conversion stepless speed regulating mode
Clamping hydraulic clamping
The characteristics of:
(1) Chinese scratch surface color, display hole position and shape.
(2) input methods: (1) Gallery (2) manual input (3) DXF (4) NC code file
(3) can be positioned directly, can be turned off, then continued drilling positiontomorrow.
(4) can be moved to any position of tool change, then continued drilling.
(5) the machine weight, machine is stable, Longmen area is large, strong bearing capacity, high drilling speed, long service life of the machine.
(6) with manual assisted fixture can clamp workpiece on the side, in order to increase the clamping force.
(7) a splash proof design, with Longmen mobile, need not around the ring frame,affecting the upper and lower material.
(8) the design of tight bed width, Longmen reduced width, increased stability, andconforms to the human engineering, near processing board piece, easy loading and unloading material.
(9) each axis double cooling, prolong the life of the bit.
(10) X, Y axis servo motor and the transmission mechanism for the direct drive,the disadvantages of poor accuracy of non belt type transmission.
(11) the bed before and after the end of easy drag, can be placed over the work area length of sheet.
(12) drilling of irregular shape and can not find the origin of the sheet.
(13) the whole function of the wireless remote control, convenient operation.
(14) to simulate four angle, back drilling
(15) porous group, can be horizontally or vertically automatic sorting.
